+1 308 465 1950
ATF Crusher Parts
Peças Adicionais para Britador VSI | Reposição | ATF

Peças para Britador VSI

Peças Adicionais para Britador VSI | Reposição | ATF

Reposição adicional para VSI: tubos de alimentação, anéis do olho, placas distribuidoras e segmentos de bigorna.

Pontas do rotor Carbeto de tungstênio Placas de desgaste

Especificações principais

Feed Tube Material
AR400/AR500 plate, ceramic-lined, or WC-insert types
Feed Eye Ring Hardness
55-64 HRC (high-chrome or WC inserts)
Distribution Plate
Manganese steel or hardened alloy steel, model-specific
Bearing Types
Spherical roller bearings (SKF, FAG equivalent)
Drive Belts
SPC/SPB profile V-belts, matched sets
Lead Time
Wear parts 2-3 weeks; assemblies 8-12 weeks
Other Parts

Complete Range of VSI Crusher Spares

Beyond the primary rotor tips and chamber wear plates, VSI crushers depend on numerous supporting components that collectively determine machine reliability, throughput consistency, and product quality. Feed tubes manufactured from AR400/AR500 abrasion-resistant plate or ceramic-lined steel direct incoming material into the rotor center with minimal turbulence, and their internal wear condition directly affects feed distribution uniformity across the rotor. Feed eye rings in high-chrome iron at 55-64 HRC or with tungsten carbide inserts protect the rotor inlet opening from erosive wear as high-velocity material enters the spinning assembly. Distribution plates inside the rotor spread incoming feed evenly to prevent localized overloading that causes premature rotor tip wear and vibration from unbalanced material discharge. Complete rotor assemblies including table, cone, tip holders, and all retention hardware are available for major overhauls or upgrade installations.

ATF supplies the complete range of VSI crusher spares for all major brands including Metso Barmac B-series, Sandvik CV-series, Terex Canica, REMco SandMax, and Kemco KID models, covering both current production units and older legacy machines. Our inventory includes feed system components, rotor internals, drive system parts such as SPC and SPB profile V-belts in matched sets, spherical roller bearings in SKF and FAG equivalent quality, bearing housings with labyrinth seals, and housing protective elements including inspection doors and dust sealing systems. Whether you need a single feed tube replacement to resolve a feed distribution issue, a set of feed eye rings to address rotor inlet erosion, or a complete rotor rebuild kit with all components pre-assembled and dynamically balanced, ATF can supply components matched to your specific crusher model, serial number, and operating configuration.

OEM-Fit Parts
Complete Range
Fast Delivery
VSI crusher spare parts including anvil rings and feed tubes manufactured by ATF

Complete VSI crusher components — anvil rings, feed tubes, distribution plates and upper/lower wear plates

Additional VSI Crusher Components

Feed Tubes

Material inlet tubes that direct feed into the rotor center. Various materials from AR plate to ceramic-lined.

Feed Eye Rings

Wear rings that protect the rotor inlet opening from abrasive feed material.

Distribution Plates

Rotor plates that spread incoming feed for even distribution across the rotor.

Rotor Assemblies

Complete rotor assemblies or rotor components including tables, cones, and mounting hardware.

Drive Components

V-belts, sheaves, bearings, and bearing housings for drive system maintenance.

Housing Components

Inspection doors, dust seals, and housing protective elements.

Component Categories

The following categories of spare parts are available for VSI crushers. Contact ATF with specific part numbers or descriptions for pricing and availability.

Feed System Components

Dureza:Varies
Aplicação:Feed tubes, feed eye rings, hopper liners
Notas:AR plate, ceramic-lined, or replaceable insert types

Rotor Components

Dureza:Varies
Aplicação:Distribution plates, rotor table, rotor cone
Notas:Model-specific profiles and materials

Drive Components

Dureza:N/A
Aplicação:Belts, sheaves, bearings, housings
Notas:OEM or premium aftermarket brands

Housing Components

Dureza:Varies
Aplicação:Doors, seals, wear indicators
Notas:Replacement and upgrade options

Note: This is a partial list of available components. Contact ATF with your specific requirements.

Need Specific VSI Parts?

Send your part numbers or descriptions for pricing on any VSI crusher components.

Request a Quote

OEM Compatibility

ATF supplies spare parts for all major VSI crusher brands. Parts are matched to OEM specifications.

Metso Barmac

  • B5100, B6150, B7150, B9100
  • VSI B Series

Sandvik

  • CV116, CV117, CV128, CV129
  • CV218, CV228, CV229

Terex Canica

  • Canica VSI Models

Kleemann

  • RAINER VSI Series

REMco

  • SandMax, ST Series

Kemco

  • KID Series
Perguntas frequentes

Other Parts Perguntas frequentes

Encontre respostas para perguntas comuns sobre other parts materiais, seleção, manutenção e pedidos. Não encontrou o que procura?

Contatar nossa equipe
How do I order parts without part numbers?
Provide the VSI crusher make, model, and serial number along with a detailed description of the part needed. The serial number is critical because VSI crusher manufacturers frequently make running changes to rotor geometry, feed system design, and wear component profiles within the same model designation, and parts from different serial number ranges may not be interchangeable. Photographs of worn components are extremely helpful, particularly close-up images showing mounting features, bolt patterns, and wear profiles with a dimensional reference such as a ruler or tape measure. For feed tubes and other components where internal wear cannot be easily photographed, include measurements of remaining wall thickness at the wear point and the original nominal dimensions if known. ATF maintains a comprehensive cross-reference database covering parts for all major VSI brands and can typically identify the correct replacement component from a combination of crusher identification data and physical description.
Can you supply complete rotor assemblies?
Yes, ATF manufactures and supplies complete VSI rotor assemblies that are fully assembled, dynamically balanced, and ready for direct installation. A complete rotor assembly typically includes the rotor table (the main structural disc), rotor cone or center hub, tip holder assemblies with fitted rotor tips in the specified material grade, distribution plate, all retention hardware including locking rings, bolts, and spacers, and a balance report documenting the final dynamic balance condition. Complete assemblies are dynamically balanced to ISO 1940 Grade G6.3 or better to minimize vibration during high-speed operation. Lead time for complete rotor assemblies is typically eight to twelve weeks from order confirmation, depending on the crusher model and material selections for the wear components. Individual rotor components such as tables, cones, and tip holders are also available separately for field assembly, typically at shorter lead times of four to six weeks.
What is the lead time for unusual parts?
Common wear parts such as feed tubes, feed eye rings, and distribution plates typically ship from stock or within two to three weeks of order confirmation. Custom components including non-standard material specifications, obsolete model parts, and specialty items generally require four to eight weeks for engineering review, pattern preparation or tooling setup, manufacturing, and quality inspection. Complete rotor assemblies and large fabricated components such as custom housing sections typically require eight to twelve weeks depending on complexity, material availability, and current production schedules. For emergency breakdown situations where VSI crusher downtime directly impacts production revenue, ATF offers expedited manufacturing and shipping programs that can substantially reduce standard lead times at additional cost. When requesting quotations, always communicate your required delivery date clearly so ATF can assess whether standard production scheduling meets your timeline or whether expedited processing is needed.
Do you supply feed system upgrade kits?
Yes, ATF offers feed system upgrade kits designed to extend component life and improve feed distribution uniformity in applications where standard OEM components experience accelerated wear. Common upgrades include replacing standard AR plate feed tubes with ceramic-lined versions (alumina tiles bonded to a steel shell) that can extend feed tube life by three to five times in highly abrasive applications, upgrading feed eye rings from standard high-chrome castings to tungsten carbide insert designs that resist the erosive wear from material entering the rotor at high relative velocity, and installing enhanced distribution plate designs with modified geometry for more uniform material spreading across the rotor. Upgrade kits are engineered to install within the existing mounting provisions of your specific VSI model without structural modifications. Contact ATF with your crusher model, current component life data, and specific wear challenges for a customized upgrade recommendation that includes projected life improvement and return-on-investment analysis.

Related VSI Crusher Parts

Rotor Tips

Tungsten carbide and ceramic rotor tips.

Saiba mais

Wear Plates

Chamber liners and anvil ring segments.

Saiba mais

HSI Blow Bars

Blow bars for HSI impact crushers.

Saiba mais

Conteúdo técnico revisado pela equipe de engenharia da ATF | Especificações metalúrgicas verificadas conforme normas ASTM/ISO

Request Any VSI Crusher Part

Send your requirements for quotation on any VSI crusher component.

Contact ATF Engineering
25+
Years Experience
60+
Countries Served
Full
Parts Range

Solicite um Orçamento Gratuito Hoje

Nossa equipe de engenharia responde em 24 horas com especificações detalhadas, recomendações de materiais e preços competitivos.

Resposta em 24 Horas Ajuste OEM Garantido Envio Mundial
Obter Orçamento Ligar +1 308 465 1950