Find Parts by Brand & Model
Use the catalog tree below to locate OEM-compatible wear and spare parts for HSI impact, cone, jaw, VSI, gyratory and hammer crushers. Select your brand, choose the exact model, and open the product list to view available components, materials, and options.
- Fast Cross-Reference: Match OEM references to ATF part codes instantly
- Engineering Options: Manganese, High-Chrome, Ceramic/MMC, TiC inserts, bespoke heat treatment
- Complete Documentation: Dimensional reports, chemical analysis, hardness profiles, and COC available on request
All Brands
How to Use the Crusher Parts Catalog
1. Select Brand
Expand the brand list in the tree above to view all available manufacturers.
2. Pick Model
Choose the exact crusher model or series that matches your equipment.
3. Open Parts
Review part categories (blow bars, jaw plates, cone liners, wear plates, rotors, mantles & bowls, etc.).
4. Request Quote
Note the ATF code (or your OEM reference) and contact our team for pricing and lead time.
Popular Part Categories
Browse by component type to find the exact parts you need for your crushing operation.
Impact Plates
Jaw Plates
Cheek Plates
Cone Liners (Mantle/Bowl)
Feed Cones
VSI Impellers & Tips
Gyratory Segments
Anvils & Wear Plates
Breaker Bars & Hammers
Screens & Grids
Fasteners & Hardware
Looking for slurry pump parts or cement plant components? Visit our dedicated sections.
Materials & Engineering Options
We offer comprehensive material selection and custom engineering to maximize wear life and throughput for your specific application.
Alloys & Inserts
- Austenitic Manganese: Mn13, Mn18, Mn22 for compression applications
- High-Chrome White Iron: Cr15–Cr27 for abrasion resistance
- Martensitic Steels: Low-alloy options for impact applications
- Advanced Reinforcements: TiC inserts & MMC ceramic composites
Process Controls
- Heat Treatment: Optimized curves per application requirements
- Dimensional Control: 2D/3D inspection and verification
- Reverse Engineering: 3D scanning for legacy and obsolete parts
- Profile Design: Application-specific optimization to extend wear life
Quality Assurance & Logistics
Every part meets rigorous quality standards with complete documentation and export-ready packaging.
Quality Standards
- ISO 9001 production with full traceability
- Mill test certificates & material chemistry reports
- Hardness mapping and microstructure analysis
Documentation
- Complete dimensional inspection reports
- Chemical composition certificates (COC)
- Fit check verification before shipment
Shipping & Export
- Export-ready packaging (ISPM-15 compliant)
- Protected palletization for safe transit
- Flexible Incoterms: EXW, FOB, CIF per order
Frequently Asked Questions
What if my brand or model is not listed?
Send the OEM reference, drawing, or part photo to our team. We will cross-reference and propose an equivalent ATF part with material options. Our reverse engineering capabilities allow us to manufacture parts for legacy and discontinued equipment.
Can you customize alloy or profile?
Yes. We optimize alloy selection, heat treatment and wear profile for your feed characteristics, gradation, and target throughput. Our engineering team can modify standard designs or create custom profiles based on your specific application requirements.
Do you supply trial sets?
Pilot batches and A/B trials are available to validate performance before full rollout. This allows you to test our parts alongside OEM or current aftermarket suppliers to verify quality and wear life improvements.
What is your typical lead time?
Standard parts: 4-6 weeks from order confirmation. Custom engineered parts: 6-8 weeks depending on complexity. Rush orders available for critical shutdowns with expedited production and air freight options.
Do you provide installation support?
Yes. We provide installation guidelines, torque specifications, and technical support. For large orders or critical applications, on-site installation support and training can be arranged.
Our Parts in Action
Get Your Custom Quote in 24-48 Hours
Expert guidance for your crusher parts needs. No hassle, no sales pressure.
20+ years serving mining & aggregate operations — Your information is secure and never shared.
Prefer another method?
Email: info@atfcs.com |
Phone: +1 308 465 1950 |
Contact page
What Happens Next?
-
1Instant Confirmation
You’ll receive an automated confirmation email immediately after submitting.
-
2Expert Review
Our technical team reviews your requirements within 4-6 business hours.
-
3Custom Quote Delivered
Receive a detailed quote with material options, pricing, and lead times within 24-48 hours.
Why Choose ATF?
Decades of expertise in crusher wear parts for mining and aggregate industries.
ISO 9001 certified manufacturing with complete material traceability and testing.
Your data is protected with enterprise-grade security. We never share your information.
“ATF provided exceptional technical support in selecting the right materials for our crushing circuit. The wear life improvement was significant, and their team was responsive throughout the entire process.”
— Operations Manager, Chilean Mining Company